Perfect Clearance Achieved
The NVIDIA GeForce RTX 4090 (304.0mm) easily clears the Fractal Design Focus 2 RGB's 405.0mm maximum GPU length.
Detailed Compatibility Analysis
Will the NVIDIA GeForce RTX 4090 fit inside a Fractal Design Focus 2 RGB?
The Fractal Design Focus 2 RGB is fully capable of housing the NVIDIA GeForce RTX 4090. Because the GPU measures 304.0mm, it easily sneaks under the case's official 405.0mm maximum limit.
Physical Tolerances
Subtracting 304.0mm from 405.0mm leaves us with a 101.0mm gap. This prevents the GPU shroud from suffocating against the front glass or mesh of the Fractal Design Focus 2 RGB, leading to optimal thermal performance.
Radiator Warning
If you are just using standard 25mm case fans in the Fractal Design Focus 2 RGB, you will have plenty of room to route your PCIe power cables cleanly. However, a push/pull radiator configuration at the front might consume that remaining 101.0mm of space.
Frequently Asked Questions
Does the Fractal Design Focus 2 RGB support vertical GPU mounting?
Many modern cases support vertical mounting via an optional PCIe riser cable. However, mounting a thick card like the NVIDIA GeForce RTX 4090 vertically can push the fans dangerously close to the glass side panel, choking airflow. Always check the case manual for specific slot spacing.
What power supply (PSU) do I need for the NVIDIA GeForce RTX 4090?
You should refer to the official manufacturer recommended PSU wattage. When building in the Fractal Design Focus 2 RGB, ensure your PSU is not longer than the case's basement shroud clearance, especially if you plan to keep the hard drive cage installed.
How do I calculate clearance if I add a front liquid cooler?
If you install an AIO liquid cooler in the front of the Fractal Design Focus 2 RGB, you must subtract the thickness of the radiator (usually 27mm) and the fans (usually 25mm) from the total 405.0mm clearance.