Perfect Clearance Achieved
The ASUS TUF Gaming RTX 4080 Super (339.0mm) easily clears the Hyte Y60 RGB's 375.0mm maximum GPU length.
Detailed Compatibility Analysis
Will the ASUS TUF Gaming RTX 4080 Super fit inside a Hyte Y60 RGB?
If you are planning a build with the ASUS TUF Gaming RTX 4080 Super and the Hyte Y60 RGB, you are in luck. The math checks out: Yes, it fits perfectly. The 375.0mm clearance easily accommodates the 339.0mm graphics card.
Physical Tolerances
Subtracting 339.0mm from 375.0mm leaves us with a 36.0mm gap. This prevents the GPU shroud from suffocating against the front glass or mesh of the Hyte Y60 RGB, leading to optimal thermal performance.
Radiator Warning
If you are just using standard 25mm case fans in the Hyte Y60 RGB, you will have plenty of room to route your PCIe power cables cleanly. However, a push/pull radiator configuration at the front might consume that remaining 36.0mm of space.
Frequently Asked Questions
Does the Hyte Y60 RGB support vertical GPU mounting?
Many modern cases support vertical mounting via an optional PCIe riser cable. However, mounting a thick card like the ASUS TUF Gaming RTX 4080 Super vertically can push the fans dangerously close to the glass side panel, choking airflow. Always check the case manual for specific slot spacing.
What power supply (PSU) do I need for the ASUS TUF Gaming RTX 4080 Super?
You should refer to the official manufacturer recommended PSU wattage. When building in the Hyte Y60 RGB, ensure your PSU is not longer than the case's basement shroud clearance, especially if you plan to keep the hard drive cage installed.
How do I calculate clearance if I add a front liquid cooler?
If you install an AIO liquid cooler in the front of the Hyte Y60 RGB, you must subtract the thickness of the radiator (usually 27mm) and the fans (usually 25mm) from the total 375.0mm clearance.