Home » ASUS TUF Gaming RTX 4080 Super » Compatibility Check
IT FITS!

Perfect Clearance Achieved

The ASUS TUF Gaming RTX 4080 Super (339.0mm) easily clears the Lian Li Lancool III (White)'s 435.0mm maximum GPU length.

Graphics Card
ASUS TUF Gaming RTX 4080 Super
Length339.0 mm
Buy GPU on Amazon
PC Chassis
Lian Li Lancool III (White)
Max GPU435.0 mm
Buy Case on Amazon
Technical Audit
GPU LENGTH VS CASE MAX +96mm Clearance
339.0mm (Card) 435.0mm (Limit)

Detailed Compatibility Analysis

Will the ASUS TUF Gaming RTX 4080 Super fit inside a Lian Li Lancool III (White)?

If you are planning a build with the ASUS TUF Gaming RTX 4080 Super and the Lian Li Lancool III (White), you are in luck. The math checks out: Yes, it fits perfectly. The 435.0mm clearance easily accommodates the 339.0mm graphics card.

Clearance and Airflow

With this specific hardware combination, you are left with exactly 96.0mm of physical space between the front edge of the GPU and the front panel (or front fans). This is a healthy amount of breathing room, ensuring your graphics card stays cool and airflow remains unrestricted.

Installation Tips

When installing a card of this size, always double-check your front panel cooling setup. If you plan to install a thick front-mounted AIO liquid cooler radiator in the Lian Li Lancool III (White), you must subtract the radiator's thickness (usually 27-30mm) from your 96.0mm remaining space.

Frequently Asked Questions

Does the Lian Li Lancool III (White) support vertical GPU mounting?

Many modern cases support vertical mounting via an optional PCIe riser cable. However, mounting a thick card like the ASUS TUF Gaming RTX 4080 Super vertically can push the fans dangerously close to the glass side panel, choking airflow. Always check the case manual for specific slot spacing.

What power supply (PSU) do I need for the ASUS TUF Gaming RTX 4080 Super?

You should refer to the official manufacturer recommended PSU wattage. When building in the Lian Li Lancool III (White), ensure your PSU is not longer than the case's basement shroud clearance, especially if you plan to keep the hard drive cage installed.

How do I calculate clearance if I add a front liquid cooler?

If you install an AIO liquid cooler in the front of the Lian Li Lancool III (White), you must subtract the thickness of the radiator (usually 27mm) and the fans (usually 25mm) from the total 435.0mm clearance.

Related Compatibility Checks