Hardware Conflict Detected
The ASUS TUF Gaming RTX 4080 Super (339.0mm) exceeds the NZXT H1 V2's 324.0mm maximum GPU length.
Detailed Compatibility Analysis
Will the ASUS TUF Gaming RTX 4080 Super fit inside a NZXT H1 V2?
No, it does not fit. You are physically short by 15.0mm when trying to squeeze the 339.0mm ASUS TUF Gaming RTX 4080 Super into the NZXT H1 V2.
The Physical Problem
Because the graphics card exceeds the case limitations by 15.0mm, it is physically impossible to close the side panel or slot the card into the PCIe lane without removing critical chassis components from the NZXT H1 V2.
Next Steps
Do not attempt to modify the NZXT H1 V2 with a Dremel. It is highly recommended to select a different chassis with at least 354.0mm of total clearance to allow for proper cable routing.
Frequently Asked Questions
Does the NZXT H1 V2 support vertical GPU mounting?
Many modern cases support vertical mounting via an optional PCIe riser cable. However, mounting a thick card like the ASUS TUF Gaming RTX 4080 Super vertically can push the fans dangerously close to the glass side panel, choking airflow. Always check the case manual for specific slot spacing.
What power supply (PSU) do I need for the ASUS TUF Gaming RTX 4080 Super?
You should refer to the official manufacturer recommended PSU wattage. When building in the NZXT H1 V2, ensure your PSU is not longer than the case's basement shroud clearance, especially if you plan to keep the hard drive cage installed.
How do I calculate clearance if I add a front liquid cooler?
If you install an AIO liquid cooler in the front of the NZXT H1 V2, you must subtract the thickness of the radiator (usually 27mm) and the fans (usually 25mm) from the total 324.0mm clearance.