Perfect Clearance Achieved
The ASUS TUF Gaming RTX 4080 Super (339.0mm) easily clears the Fractal Design Pop Air's 405.0mm maximum GPU length.
Detailed Compatibility Analysis
Will the ASUS TUF Gaming RTX 4080 Super fit inside a Fractal Design Pop Air?
Good news! The ASUS TUF Gaming RTX 4080 Super physically fits inside the Fractal Design Pop Air. With a card length of 339.0mm and a chassis clearance of 405.0mm, you won't need to break out the Dremel.
Physical Tolerances
Subtracting 339.0mm from 405.0mm leaves us with a 66.0mm gap. This prevents the GPU shroud from suffocating against the front glass or mesh of the Fractal Design Pop Air, leading to optimal thermal performance.
Radiator Warning
If you are just using standard 25mm case fans in the Fractal Design Pop Air, you will have plenty of room to route your PCIe power cables cleanly. However, a push/pull radiator configuration at the front might consume that remaining 66.0mm of space.
Frequently Asked Questions
Does the Fractal Design Pop Air support vertical GPU mounting?
Many modern cases support vertical mounting via an optional PCIe riser cable. However, mounting a thick card like the ASUS TUF Gaming RTX 4080 Super vertically can push the fans dangerously close to the glass side panel, choking airflow. Always check the case manual for specific slot spacing.
What power supply (PSU) do I need for the ASUS TUF Gaming RTX 4080 Super?
You should refer to the official manufacturer recommended PSU wattage. When building in the Fractal Design Pop Air, ensure your PSU is not longer than the case's basement shroud clearance, especially if you plan to keep the hard drive cage installed.
How do I calculate clearance if I add a front liquid cooler?
If you install an AIO liquid cooler in the front of the Fractal Design Pop Air, you must subtract the thickness of the radiator (usually 27mm) and the fans (usually 25mm) from the total 405.0mm clearance.