Perfect Clearance Achieved
The ASUS TUF Gaming RTX 4080 Super (339.0mm) easily clears the Cooler Master MasterBox TD500 Mesh's 410.0mm maximum GPU length.
Detailed Compatibility Analysis
Will the ASUS TUF Gaming RTX 4080 Super fit inside a Cooler Master MasterBox TD500 Mesh?
Good news! The ASUS TUF Gaming RTX 4080 Super physically fits inside the Cooler Master MasterBox TD500 Mesh. With a card length of 339.0mm and a chassis clearance of 410.0mm, you won't need to break out the Dremel.
Physical Tolerances
Subtracting 339.0mm from 410.0mm leaves us with a 71.0mm gap. This prevents the GPU shroud from suffocating against the front glass or mesh of the Cooler Master MasterBox TD500 Mesh, leading to optimal thermal performance.
Radiator Warning
If you are just using standard 25mm case fans in the Cooler Master MasterBox TD500 Mesh, you will have plenty of room to route your PCIe power cables cleanly. However, a push/pull radiator configuration at the front might consume that remaining 71.0mm of space.
Frequently Asked Questions
Does the Cooler Master MasterBox TD500 Mesh support vertical GPU mounting?
Many modern cases support vertical mounting via an optional PCIe riser cable. However, mounting a thick card like the ASUS TUF Gaming RTX 4080 Super vertically can push the fans dangerously close to the glass side panel, choking airflow. Always check the case manual for specific slot spacing.
What power supply (PSU) do I need for the ASUS TUF Gaming RTX 4080 Super?
You should refer to the official manufacturer recommended PSU wattage. When building in the Cooler Master MasterBox TD500 Mesh, ensure your PSU is not longer than the case's basement shroud clearance, especially if you plan to keep the hard drive cage installed.
How do I calculate clearance if I add a front liquid cooler?
If you install an AIO liquid cooler in the front of the Cooler Master MasterBox TD500 Mesh, you must subtract the thickness of the radiator (usually 27mm) and the fans (usually 25mm) from the total 410.0mm clearance.