Home » ASUS TUF Gaming RTX 4080 Super » Compatibility Check
IT FITS!

Perfect Clearance Achieved

The ASUS TUF Gaming RTX 4080 Super (339.0mm) easily clears the NZXT H9 Flow (White)'s 435.0mm maximum GPU length.

Graphics Card
ASUS TUF Gaming RTX 4080 Super
Length339.0 mm
Buy GPU on Amazon
PC Chassis
NZXT H9 Flow (White)
Max GPU435.0 mm
Buy Case on Amazon
Technical Audit
GPU LENGTH VS CASE MAX +96mm Clearance
339.0mm (Card) 435.0mm (Limit)

Detailed Compatibility Analysis

Will the ASUS TUF Gaming RTX 4080 Super fit inside a NZXT H9 Flow (White)?

Yes, it fits! The ASUS TUF Gaming RTX 4080 Super comes in at 339.0mm long, leaving plenty of room inside the NZXT H9 Flow (White) (which supports up to 435.0mm).

Clearance and Airflow

With this specific hardware combination, you are left with exactly 96.0mm of physical space between the front edge of the GPU and the front panel (or front fans). This is a healthy amount of breathing room, ensuring your graphics card stays cool and airflow remains unrestricted.

Build Advice

Since the ASUS TUF Gaming RTX 4080 Super is a heavy piece of hardware, we highly recommend using a GPU anti-sag bracket. Even though it clears the NZXT H9 Flow (White) length-wise, PCIe slot sag is a real threat to your motherboard over time.

Frequently Asked Questions

Does the NZXT H9 Flow (White) support vertical GPU mounting?

Many modern cases support vertical mounting via an optional PCIe riser cable. However, mounting a thick card like the ASUS TUF Gaming RTX 4080 Super vertically can push the fans dangerously close to the glass side panel, choking airflow. Always check the case manual for specific slot spacing.

What power supply (PSU) do I need for the ASUS TUF Gaming RTX 4080 Super?

You should refer to the official manufacturer recommended PSU wattage. When building in the NZXT H9 Flow (White), ensure your PSU is not longer than the case's basement shroud clearance, especially if you plan to keep the hard drive cage installed.

How do I calculate clearance if I add a front liquid cooler?

If you install an AIO liquid cooler in the front of the NZXT H9 Flow (White), you must subtract the thickness of the radiator (usually 27mm) and the fans (usually 25mm) from the total 435.0mm clearance.

Related Compatibility Checks